You can fix Soundcore earbuds one side (Right Or Left) not working issue by resetting the right earbud, connecting them with each other, turning off wear detection, charging them properly, removing unnecessary stickers, cleaning earbuds properly, taping on the earbuds, checking your device “Audio Balanced” settings, updating the Soundcore earbuds firmware, trying A new device or buying A new earbuds.
Please remember that Soundcore is a very famous brand and has different models available in the market. Various people using the various models usually face Soundcore earbuds one side not working. According to the Soundcore models you have, if you are searching for any of the terms given below:
Soundcore Liberty Air 2 One Side (Right or Left) Earbud Not Working
Soundcore Spirit Dot 2 One Side (Right or Left) Earbud Not Working
Soundcore Liberty 3 Pro One Side (Right or Left) Earbud Not Working
Soundcore Liberty Air 2 Pro One Side (Right or Left) Earbud Not Working
Soundcore Liberty 2 Pro One Side (Right or Left) Earbud Not Working
Soundcore Life P2 One Side (Right or Left) Earbud Not Working
Soundcore Life Dot 2 One Side (Right or Left) Earbud Not Working
Soundcore Life Note One Side (Right or Left) Earbud Not Working
Soundcore Life A1 One Side (Right or Left) Earbud Not Working
Soundcore Liberty Neo One Side (Right or Left) Earbud Not Working
Then you are on the right page because most of the solutions to fix Soundcore one side not working issue are common in all models offered by Soundcore.
Let’s discuss each solution in detail: Step By Step
Reset Right Earbud First
Many people suggest that to fix the issue of Soundcore earbuds one side (Right or Left) not working, you should perform a reset on both earbuds. However, despite resetting, many users still face the same Soundcore earbuds problem. We have also noticed that many users discuss this issue on relevant forums, mentioning that the error persists even after resetting the earbuds.
In such cases, we recommend trying a specific sequence: reset the right earbud first before resetting the left one. By following this approach, it is believed that the error can be resolved successfully.
You can reset the right earbud by following the below given steps:
- Turn off the right earbud first.
- Open the charging case.
- Place the right earbud inside the case and leave the case lid open.
- On the top of the charging case, there is a power button. Press and hold this button for at least 10 seconds or until the light on the case flashes three times.
- Keep the lid open until you see one light flashing rapidly and the other light flashing slowly.
- After this, take the right earbud out of the case and they are now reset.
Read Here: Soundcore App For PC: How To Download in Windows 7/8/10/11
Connect Them with Each Other First
If you are facing the issue of Soundcore earbuds one side not working, it is possible that one earbud got connected to your device first while the other one was not yet in pairing mode. To resolve this issue, it is essential to put both earbuds into pairing mode simultaneously and then connect them to your device.
Please follow the given steps:
- Turn Off Bluetooth on Your Device: Make sure Bluetooth is turned off on your device to avoid any conflicting connections.
- Ensure Both Earbuds are Charged Equally: Confirm that both earbuds have an adequate charge before proceeding.
- Remove Earbuds from the Charging Case: Take both earbuds out of the charging case.
- Wait for Pairing Mode: Wait for about 10 seconds or more while observing the earbuds’ lights. They should enter pairing mode during this time.
- Turn On Bluetooth on Your Device: Now, turn on Bluetooth on your device.
- Pair the Earbuds: Look for the earbuds’ name in your device’s Bluetooth settings and connect to them simultaneously.
After following these steps, both earbuds should be connected together and work in sync with your device. This should resolve the issue of one earbud not working.
Read: Is Soundcore A Good Brand
Turn Of Wear Detection Feature
In Soundcore earbuds, the “wear detection” feature detects whether you have put on the earbuds in your ears or not. If you remove the earbuds from your ears, they will automatically turn off to conserve battery life. This feature is essential for preserving the battery when the earbuds are not in use.
If you have not worn the earbuds properly, then the wear detection feature may turn off that earbud, and you may face the issue of Soundcore earbuds one side (Left or Right) not working. Hence, it is essential to wear them properly.
But after wearing them properly, if you are still facing the issue, we suggest turning off the wear detection feature. You can use the Soundcore app to turn off the wear-detection feature.
You can easily find the wear detection turn-off option in your Soundcore app. Just turn it off simply by pressing the turn-off button.
Charge Them Properly
It is also possible that one earbud is not working because of a low charge. To address this, make sure to place both earbuds in the charging case and charge them. When you believe they have sufficient charge, reconnect them with your device to fix Soundcore earbuds one side (right or left) not working.
Remove Unnecessary Stickers
The earbuds may have stickers on them; please ensure to remove these stickers. Stickers can cause problems like improper charging or difficulties in establishing a proper connection between the earbuds. If you encounter any issues, make sure to check for any extra stickers that might be causing the problem and remove them.
Clean Earbuds Properly
If your earbuds are dirty, you may face some issues. You should clean your earbuds regularly to avoid these problems.
To clean your earbuds, follow these steps:
- In a small bowl, mix ¼ teaspoon of dishwashing liquid with ½ cup of warm water. Dishwashing liquid is better than hand soap, as hand soap might leave a residue.
- Take off the foam or silicone tips from the earbuds and put them in the cleaning solution. Let them soak for at least 30 minutes.
- After soaking, remove the tips from the solution. Use a cotton swab to clean away any dirt or wax. Rinse them well with warm water and let them dry on a lint-free cloth. Make sure they are completely dry before putting them back on the earbuds.
- Hold the earbud with the mesh cover facing down to prevent particles from falling deeper into the earbud. Use a soft, dry toothbrush to gently brush away any visible wax.
Tap On The Earbuds
To attempt to fix the Soundcore one side not working issue using tapping, follow these steps:
- Disconnect both earbuds and turn off Bluetooth on your device.
- Place both earbuds inside the charging case.
- Take out the right earbud from the case and tap it 4-5 times. Then, put it back in the charging case.
- Take out the left earbud from the case and tap it 4-5 times. Then, put it back in the charging case.
- Take both earbuds out of the case simultaneously and observe the LED indicators.
- When the earbuds’ LED lights flash red, reconnect them to your device.
Hopefully, following these steps will fix the issue.
Check Your Device’s “Audio Balanced” Settings
Sometimes, it happens that the audio balance setting on your device gets changed, causing an imbalance in audio between the earbuds. You may hear more sound from one earbud while the other earbud produces less or no sound at all. This can lead to the Soundcore earbuds one side (right or left) not working.
To fix this, it’s essential to adjust the audio balance setting on your device. In our article “Why are my soundcore earbuds so quiet,” we have discussed in detail how to find the audio balance setting on your phone and how to adjust it. Please refer to that section for more clarification.
Update The Soundcore Earbuds Firmware
If your Soundcore earbuds’ firmware is not updated, you may face this issue. Hence, it is essential to keep the firmware updated. To update the firmware, follow the given steps:
- Click on the top left corner. If there is a red dot, it means a firmware update is needed.
- In the new section that opens, locate the option to update firmware and click on it.
- Place your earbuds in the charging case and leave the case open.
- After clicking the firmware update option, a “Download” button will appear. Click on it.
- Then, click on the “Install” button.
- The earbuds will start updating their firmware.
Please ensure that your earbuds and charging case have at least 20% battery available before proceeding with these steps.
By following these steps, your Soundcore earbuds should update their firmware and potentially resolve any issues you are facing.
Try A New Device
Sometimes, the earbuds may be working fine, but there could be an issue with your device. This could also lead to the Soundcore earbuds one side not working issue. Therefore, it’s a good idea to try connecting the earbuds to a different device temporarily. If they work fine on the new device, it indicates that the problem lies with your original device. In such cases, consider using the earbuds with the new device permanently.
Contact The Soundcore Support
If you are facing issues with your Soundcore earbuds one side (right or left) and they are not working properly, I suggest reaching out to Soundcore support for professional guidance on how to fix Soundcore earbuds one side (right or left) not working.
You can contact them at service@soundcore.com. If you are not satisfied with their guidance and your earbuds are still under warranty, you have the option to claim the warranty for any defective piece. Soundcore allows you to claim the warranty for such cases.
Buy New Earbuds
If you have followed all the steps provided above, and you are still facing the same error with your earbuds, then it’s advisable to consider buying new Soundcore earbuds.
If you buy the same model pair, there’s a possibility of encountering the same issue. Therefore, we suggest considering a different model from Soundcore this time. You can choose either the Soundcore Life P3 or Anker Soundcore Life P3i, as most users don’t often face the issue of one side not working in these earbuds.
Hence, you can opt to buy one of them and ensure you compare Soundcore Life P3 VS Anker Soundcore Life P3i Specs before making an informed decision, so you can enjoy decisive sound quality.
Soundcore Liberty Air 2 One Side (Right or Left) Earbud Not Working
Introducing the Soundcore Liberty Air 2, a cutting-edge pair of truly wireless earbuds that offer an unparalleled audio experience. However, like any electronic device, they may encounter issues from time to time. One common problem users might face is when one side earbuds stop working.
However, you can fix Soundcore Liberty Air 2 right earbud not working issue by charging them properly, turning off the wear detection feature, resetting the earbuds and cleaning them properly. In addition to this, you can fix Soundcore liberty air 2 left earbud not working issue by removing unnecessary tapes or stickers, updating the firmware or by contacting the Soundcore support.
We have discussed each step in detail in the article above, and you can follow it to fix Soundcore Liberty Air 2 one side (Right or left) Earbud not working issue.
Soundcore Spirit Dot 2 One Side (Right or Left) Earbud Not Working
Meet the Soundcore Spirit Dot 2: super cool wireless earbuds that give you awesome sound. But sometimes, these earbuds can have problems, like Soundcore Spirit Dot 2 right earbud not working.
No worries! To fix the Soundcore Spirit Dot 2 left earbud not working issue, make sure to charge them right, turn off the wear detection, reset them, and keep them clean. In addition to this, you can fix Soundcore spirit Dot 2 one side not working by taking off any extra tapes or stickers, updating the software, or asking Soundcore for help.
We explained each step really well in the article above, so just follow those steps to make your Soundcore Spirit Dot 2 work perfectly again.
Soundcore Liberty 2 Pro One Side (Right or Left) Earbud Not Working
Let’s talk about the Soundcore Liberty 2 Pro earbuds. Sometimes, one side of them might not work.
If you’re facing trouble with the Soundcore Liberty 2 Pro right earbud not working or Soundcore Liberty 2 Pro left earbud not working, make sure it’s charged, try turning off the wear detection, reset them, and keep them clean. In addition to this, to fix the issue, remove any extra stuff like tapes or stickers, update the software, or get help from Soundcore.
We’ve explained everything step by step in the article above, so you can follow those instructions to get your Soundcore Liberty 2 Pro earbuds working perfectly again.
Soundcore Liberty 3 Pro One Side (Right or Left) Earbud Not Working
Introducing the Soundcore Liberty 3 Pro: amazing wireless earbuds that deliver fantastic sound. Occasionally, though, you might face issues like Soundcore Liberty 3 Pro one side not working.
No need to worry! To address the problem of the Soundcore Liberty 3 Pro right earbud not working, ensure proper charging, disable wear detection, reset the earbuds, and maintain cleanliness. Moreover, to fix Soundcore Liberty 3 Pro left earbud not working, remove any extra tapes or stickers, update the software, or seek assistance from Soundcore.
We’ve provided clear instructions for each step in the article above. Just follow these guidelines to restore your Soundcore Liberty 3 Pro earbuds to their optimal performance.
Soundcore Life P2 One Side (Right or Left) Earbud Not Working
Let’s focus on the Soundcore Life P2 earbuds. There might be times when you face the issue of Soundcore life P2 one side Earbud not working.
If you’re having an issue with the Soundcore Life P2 right earbud not working or the Soundcore Life P2 left earbud not working, start by ensuring it’s charged, try turning off the wear detection, reset them, and keep them clean. Additionally, you can resolve the problem by removing any extra items like tapes or stickers, updating the software, or reaching out to Soundcore support.
We’ve laid out clear, step-by-step instructions in the article above. By following these guidelines, you can restore your Soundcore Life P2 earbuds to their optimal functionality.
Soundcore Liberty Air 2 Pro One Side (Right or Left) Earbud Not Working
Discover the incredible Soundcore Liberty Air 2 Pro: the epitome of wireless earbuds delivering a phenomenal sound experience. Occasionally, a hurdle may arise – Soundcore Liberty air 2 pro one side not working.
But fret not! To address the challenge of Soundcore Liberty air 2 pro right earbud not working, ensure full charging, deactivate wear detection feature, initiate a reset, and uphold cleanliness. Moreover, to fix the Soundcore Liberty air 2 pro left earbud not working, consider removing surplus tapes or stickers, updating the software, or reaching out to the Soundcore support team.
Detailed instructions for each step can be found in the article above. By adhering to these guidelines, you’ll swiftly restore the full potential of your Soundcore Liberty Air 2 Pro earbuds.
Frequently Asked Questions
Why is only one of my Soundcore earphones working?
There can be various reasons why only one Soundcore earbud is working. One possibility is that the other earbud’s charging is not occurring correctly, and it might not be turning on. Another reason could be that there is earwax or some other obstruction that is restricting its functionality.In addition to the mentioned reasons, another possibility is that the second earbud might not have entered pairing mode correctly or its connection has not been established yet. You can fix this issue by following the steps mentioned above in this article.
Why is only my left Soundcore earbud working?
The issue with the Soundcore earbuds, where only the left earbud is working, could be caused by several reasons. One possibility is that the volume setting for the right earbud is too low, resulting in no sound coming from it. Additionally, it’s possible that the firmware of the earbuds is outdated, or the wear detection feature might be causing the problem. To fix this issue, you can follow the solutions provided in the article above:
How do you fix a left earbud that won’t work?
To fix the issue of the left earbud not working, you can follow the steps mentioned below. You can update the firmware, clean the earbuds, reset the earbuds, or tap the earbud’s surface to resolve the problem of Soundcore earbuds’ left side not working.
How to fix Soundcore Life Dot 2 one side (right or left) earbud not working?
If you’re experiencing trouble with your Soundcore Life Dot 2 earbuds, specifically with the Soundcore Life Dot 2 right earbud not working or the Soundcore Life Dot 2 left earbud not working, don’t worry. We have some steps you can try to fix the issue.
First, ensure that the problematic earbud is adequately charged. Next, you can attempt turning off the wear detection feature and resetting the earbuds. Additionally, keeping the earbuds clean is crucial. Try removing any excess tapes or stickers that might be causing interference.
If the Soundcore Life Dot 2 one side not working problem persists, consider updating the software or reaching out to Soundcore support for assistance. The detailed instructions for each of these steps can be found in the article above.
How to fix Soundcore Life Note one side (right or left) earbud not working?
Experiencing issues with your Soundcore Life Note earbuds? Whether it’s the Soundcore Life Note left earbud not working, the Soundcore Life Note right earbud not working, or one side having trouble, follow these steps to troubleshoot:
Check Battery: Ensure the problematic earbud is fully charged.
Wear Detection: Try turning off wear detection in the earbud settings.
Reset Earbuds: Perform a reset as outlined in the user manual.
Keep Clean: Ensure the earbuds are clean and free from any obstructions.
Software Update: Update the earbud’s firmware if available.
If the issue persists, contact Soundcore support for further assistance. Following these steps can help resolve the Soundcore Life Note one side not working problem, be it the right or left earbud.
How to fix Soundcore Life A1 one side (right or left) earbud not working?
If you’re facing an issue with your Soundcore Life A1 earbuds, whether it’s the Soundcore Life A1 left earbud not working or Soundcore Life A1 right earbud not working, don’t worry – solutions are within reach. Begin by ensuring the earbud is sufficiently charged and clean from any debris. Try disabling any wear-detection feature in the settings.
If the problem persists, attempt a reset as per the provided instructions. In case none of these steps resolve the matter, consider checking for available firmware updates or reaching out to Soundcore support for further guidance. These steps should aid in addressing the Soundcore Life A1 one side not working situation, irrespective of whether it’s the right or left earbud.
How to fix Soundcore Liberty Neo one side (right or left) earbud not working?
If you’re encountering an issue where one side of your Soundcore Liberty Neo earbuds isn’t functioning – whether it’s the Soundcore Liberty Neo left earbud not working or the Soundcore Liberty Neo right earbud not working – there are steps you can take to troubleshoot.
Start by ensuring the affected earbud is adequately charged and free from any debris. Try disabling any wear detection features and consider resetting the earbuds if needed. Should the problem persist, check for firmware updates and don’t hesitate to reach out to Soundcore support for assistance. By following these steps, you should be able to resolve the Soundcore Liberty Neo one side not working problem, whether it’s the right or left earbud.
Conclusion
To fix the Soundcore earbuds one side not working issue, there are several important steps you can follow. Since you cannot use both earbuds together, and both earbuds do not produce sound simultaneously, you need to fix this issue. To fix Soundcore earbuds one side (right or left) not working, reset the earbuds, clean the earbuds, tap the earbud surface, remove unnecessary stickers from the earbuds, turn off wear detection, ensure proper charging, update firmware, maintain audio balance setting.
Hope these steps will help you to fix the issue and resume your journey with both earbuds simultaneously.
Aneeq Aish takes immense pride in being a dedicated researcher, committed to helping individuals like you make well-informed and decisive choices before purchasing or fixing any sound-related equipment like headphones & speakers.