How to Make Soundcore Headphones Discoverable 

Soundcore headphones have a wide range of models, and I haven’t used every model. So, it’s better to approach someone who has used various models and knows how to make different Soundcore models discoverable.

So, I went to my cousin Muhammad Irfan, who has a large shop in his city and deals with the selling and purchasing of headphones & other related stuff. He’s an expert in this field. That’s why I sought professional tips from him, and in this article, I’ll be sharing the tips provided by Irfan with you.

You can also reach out to Irfan at

Using the methods outlined below, you can make Soundcore headphones discoverable:

  • Place the Soundcore headphones inside the charging case and continuously press the button on the case for 3 seconds.
  • Take the Soundcore headphones out of the case.
  • Remove the Soundcore headphones from the case and press the button on the case for 3 seconds.
  • Take the Soundcore headphones out of the case and continuously press the button on each individual earbud for 3-5 seconds.
  • Take the earbuds out of the case and touch the sensor area twice.
  • Remove the Soundcore headphones from the case and place your finger on the sensor area for 3-5 seconds.

Now Let’s Discuss each method in detail.

Keeping Soundcore Headphones In The Charging Case

One way to make your Soundcore headphones discoverable is by keeping them inside the charging case. Make sure that the charging case lid is open.

Afterward, locate the button on either the front or back side of the case and press it consistently for around 3 seconds.

Direct your attention to the Soundcore headphones and take note of the indications from the LED lights.

When the LED lights begin to flash, this signifies that your Soundcore headphones have become discoverable.

By following these steps, you can ensure that your Soundcore headphones are ready to be discoverable.

Read: Is Soundcore A Good Brand

Removing The Soundcore Headphones Out of The Case

Irfan also mentioned that if you want to make Soundcore headphones discoverable, you can simply take them out of the charging case. He explained that as soon as the headphones are removed from the charging case, they turn on automatically. 

There’s no need to press any buttons to turn them on. Once they are on, they also become automatically discoverable. This is a simple and straightforward method to make Soundcore headphones discoverable.

Taking Headphones Out & Pressing Case Button

Some of the Soundcore headphones don’t automatically turn on or become discoverable when taken out of the case. Some additional steps need to be followed.

Remove the headphones from the case.

Place them in your ears.

Press and hold the button on the charging case for 3 seconds.

Observe the indicator lights on the headphones.

When the lights start flashing, it indicates Soundcore headphones are discoverable.

You may also hear a notification, your headphones are now discoverable..

Removing Headphones & Pressing Earbuds’ Buttons

Irfan informed us that some Soundcore headphones models lack a button on the case, so there’s no need to worry. In such cases, the button is located on each individual earbud instead of the case. To make models like these discoverable, follow these steps:

Take the earbuds out of the case.

Place them in your ears.

Find the button on each earbud.

Then press the button for 3-5 seconds.

Note the LED light and attempt to listen for a notification.

When the lights start flashing or if you receive a notification, it means the Soundcore earbuds are now discoverable.

Removing Headphones & Double Touching Sensors

In some Soundcore headphone models, there are no buttons on either the case or the individual earbuds. To make these Soundcore headphones discoverable, the sensor area needs to be used. The sensor area is located on the surface of the earbuds, and it helps you make Soundcore headphones discoverable.

Remove the earbud from the charging case.

Wear them in your ears.

Touch the sensor area twice.

Observe the LED light or notification.

By doing this, they will become discoverable.

Taking Headphones & Touching Sensor For 3-5 Sec

Irfan further explained on Soundcore earbuds guide that if clicking the sensor area twice doesn’t make Soundcore headphones discoverable, try tapping the sensor on your earbuds.

Gently tap the sensor on your ear for about 3-5 seconds.

By doing this, the LED will start flashing, indicating that the headphones are now discoverable.

Pair Soundcore Headphones With Multiple Devices

When your Soundcore headphones become discoverable, you can easily connect them to multiple devices. You can pair soundcore life p3 earbuds & other Soundcore earbuds to multiple devices using simple steps. After that, the connection is established, and you can enjoy your journey with hassle-free enjoyment.

Our Best Comparison To Help You Make Informed Decision 

People often discuss two popular Soundcore models: Soundcore Life P3 vs Anker Soundcore Life P3i specs. Many are interested in these models. Some prefer the Soundcore Life P3i because it has Bluetooth 5.2. Others like the Soundcore Life P3 because its battery can last up to 50 hours. To choose wisely, it’s important to know the specifications of Soundcore Life P3 vs. Soundcore Life P3i.

Our Best Soundcore Earbuds Related Guides

How To Turn On Soundcore Life P3 Without Case

Fix Soundcore Earbuds One Side Not Working

How to Find Lost Soundcore Earbuds

Why Are My Soundcore Earbuds So Quiet

Frequently Asked Questions

How do I make Soundcore discoverable?

You can make Soundcore headphones discoverable using various methods. Some models require placing them in the charging case and pressing the case button, while others involve pressing buttons on the headphones or tapping their sensor areas. These actions activate the discoverable mode, allowing other devices to find and connect to them via Bluetooth.

How do I put my Soundcore headset in pairing mode?

To put your Soundcore headset in pairing mode, follow the specific instructions for your model. This often involves pressing and holding buttons on the charging case or the headphones themselves until LED lights indicate the pairing mode. 

How do I put my Soundcore headphones in discovery mode?

To put your Soundcore headphones in discovery mode, typically you need to follow the steps mentioned earlier, such as placing them in the charging case, pressing buttons, or tapping the sensor area. Discovery mode makes your headphones visible to other devices, allowing them to establish a Bluetooth connection.

Why won’t my Soundcore headphones connect?

If your Soundcore headphones are not connecting, make sure they are properly charged and turned on. Check if they are in pairing mode or discovery mode, as this is essential for other devices to find and connect to them. Additionally, ensure that Bluetooth is enabled on the device you’re trying to connect to and that there are no active connections interfering with the pairing process. If the issue persists, consult the user manual or contact Soundcore customer support for assistance.


To make Soundcore headphones discoverable, several methods can be employed, varying based on the specific model. These methods typically involve actions such as pressing buttons on the charging case or headphones or tapping sensor areas. By activating the discoverable mode, these headphones become visible to other devices, enabling seamless Bluetooth connections for an enhanced audio experience.

Leave a Comment