Resetting the JBL Tune 230NC TWS earbuds can be a straightforward solution to address connectivity or functionality issues. With various methods available to reset JBL Tune 230NC TWS, users can choose the most suitable approach based on their preferences or the nature of the problem.
Whether utilizing the JBL Headphones app for a seamless reset, tapping and pressing the earbuds for a quick resolution, or following a series of steps for a comprehensive reset, these techniques offer flexibility and convenience.
Additionally, the option to perform a soft or hard reset provides users with versatile tools to troubleshoot and restore their earbuds to optimal performance.
In this article, we will delve into these methods, providing step-by-step guidance on how to reset the JBL Tune 230NC TWS earbuds effectively.
Reset JBL Tune 230NC TWS Using the JBL Headphones App
To factory reset your JBL Tune 230NC using the JBL Headphones app, follow these steps:
Make sure your JBL Tune 230NC earbuds are connected to your device via Bluetooth.
Launch the JBL Headphones app on your smartphone or device.
Find and select your connected JBL Tune 230NC earbuds within the app. This is usually listed in the main screen or under a “Devices” or “Connected Devices” section.
Look for a settings icon or option. This is often represented by a gear or cogwheel icon.
Tap “About”:
Within the settings, locate and tap on the “About” or a similar option. This section typically contains details about your device.
In the “About” section, there should be an option for “Reset to Factory Settings” or something similar.
Once you find the reset option, the app may prompt you to confirm the action. Confirm that you want to reset the earbuds to their factory settings.
Allow the app to carry out the reset process. This may take a few moments.
After the reset is complete, your JBL Tune 230NC will be returned to its original factory settings.
Read Here: JBL Tune 230NC Review
Reset JBL Tune 230NC TWS Using the JBL Headphones App: Method 2
Avoid any type of JBL Tune 230 NC Problems and reset JBL Tune 230NC TWS using the JBL headphones app:
Open the JBL headphones app on your device.
Locate and tap on the ‘switch off’ button in the app. It is usually found in the right upper corner and represented by a circle with a dash at the top.
Perform this action as a last resort.
After tapping the ‘switch off’ button, observe if the right earbud lights up again.
If successful, close the loading dock.
Reopen the loading dock and check if the earbuds are functioning normally.
This method essentially involves using the JBL headphones app to turn off the earbuds, and then reopening the loading dock to see if the right earbud resets and functions properly.
Reset JBL Tune 230 NC Using the Tapping & Pressing Option
You can reset the JBL Tune 230 NC by tapping and pressing the sensor touch area. To reset your JBL Tune 230NC by tapping 2 times and holding a third time for five seconds, follow these steps:
Remove both JBL Tune 230NC earbuds from the charging case.
Make sure Bluetooth is enabled on the device you want to connect the earbuds to.
If the earbuds are not already in pairing mode, you might need to put them in pairing mode.
Tap the touch-sensitive surface of both earbuds two times in quick succession. You might hear a confirmation sound or notice a visual indicator.
After tapping twice, immediately press and hold the touch-sensitive area of both earbuds for five seconds.
Watch for any visual or audible cues that indicate the reset was successful. This might include LED lights blinking or a specific sound.
After the reset, you may need to reconnect the earbuds to your device. Put them back in the charging case and pair them with your device.
Reset JBL Tune 230 NC Following Series of Steps
To reset your JBL Tune 230NC by following some complex series of steps. For your ease we have mentioned these steps in an easy way. Here are the steps :
Take both earbuds out of the charging case.
Tap the touch-sensitive surface of both earbuds three times simultaneously.
Delete the JBL Tune 230NC from the Bluetooth options on your connected device.
Place both earbuds back into the charging case.
Close the lid of the charging case.
Wait for the LED light on the front side of the charging case to stop glowing.
Open the lid of the charging case.
Look for blinking blue lights on both earbuds, indicating they are in pairing mode.
Reconnect the JBL Tune 230NC earbuds via Bluetooth settings on your device.
Reset JBL Tune 230 NC Using the Soft Reset Method
To perform a soft reset on your JBL Tune 230NC earbuds:
Place the earbuds in the charging case: Make sure they are properly seated in the case.
Ensure the earbuds are charging: Check if the charging indicators are on.
Once these conditions are met, proceed with the following steps:
Press and hold the button on both earbuds: Hold down the button on each earbud simultaneously.
Hold for at least 20 seconds: Keep holding until the LED lights on both earbuds blink white before turning off.
This indicates that the soft reset JBL Tune 230NC TWS has been successful.
Reset JBL Tune 230 NC Using the Hard Reset Method
To perform a hard reset JBL Tune 230NC TWS earbuds, follow the steps:
Remove the earbuds from the charging case: Take them out of the case.
Press and hold the button on both earbuds: Hold down the button on each earbud simultaneously.
Hold for at least 30 seconds: Keep holding until the LED lights on both earbuds blink white and red before turning off.
A hard reset erases all settings and pairings on the earbuds, so make sure to have a backup of any important data. If these steps don’t resolve your issue, you may also want to check for any specific instructions in the user manual or contact JBL customer support for assistance.
Once reset is done you can connect JBL Tune 230NC TWS to various devices. It can also help you to fix JBL Tune 230 NC left or right earbud not working.
Best JBL 230 NC Earbuds Comparisons
JBL Tune 230 NC VS JBL Vibe 200 TWS
Delve into our analysis of the JBL Tune 230NC and JBL Vibe 200TWS. Understand their unique strengths and decide which earbuds suit your daily soundtrack.
Beats Studio Buds vs JBL Tune 230 NC
Looking for a detailed comparison? Join us in our comprehensive exploration of Beats Studio Buds and JBL Tune 230 NC. Delve deeper to discover key insights and thorough comparisons, helping you make an informed decision for your audio preferences.
JBL Tune 225 TWS VS JBL Tune 230 NC
Explore the distinctions between JBL Tune 225 TWS and JBL Tune 230 NC in our detailed guide. Visit for a comprehensive analysis of their technical specs and performance, aiding you in choosing the right earbuds.
Conclusion
Resetting the JBL Tune 230NC TWS earbuds offers users a range of effective solutions to address connectivity and performance issues. Whether opting for the convenience of the JBL Headphones app, the tactile approach of tapping and pressing, or a comprehensive series of steps, users have versatile tools at their disposal.
The ability to choose between soft and hard reset JBL Tune 230NC TWS further enhances troubleshooting capabilities. By following these methods, users can restore their earbuds to factory settings, ensuring a seamless and optimal audio experience.
Aneeq Aish takes immense pride in being a dedicated researcher, committed to helping individuals like you make well-informed and decisive choices before purchasing or fixing any sound-related equipment like headphones & speakers.