Pairing Soundcore Life Q20 headphones is very easy. It can be done using Bluetooth. However, many newcomers and users often face issues in pairing their Soundcore Life Q20 headphones. In today’s guide, we will learn how to pair Soundcore Life Q20 headphones with various devices such as Windows, Android, iOS, MacBook, and other commonly used devices.
We will also address the question that many users have: whether Soundcore Life Q20 headphones can be paired with multiple devices or not. The simple answer to this is yes. In this guide, we have explained this in detail.
Let’s get started and learn how to pair Soundcore Life Q20 headphones.
Preparations For Pairing:
Before we proceed to pair the Soundcore earbuds including Life Q20 headphones with audio sources, we need to prepare them by following certain steps. Here, we will discuss various preparations to address different issues and difficulties that may arise during the pairing process.
Put Soundcore Life Q20 In Pairing Mode:
The first preparation involves putting our Soundcore Life Q20 headphones into pairing mode. To do this, we need to turn on the headphones. Press the power button on the headphones for 2 seconds to turn them on. Once they are turned on, they will automatically enter pairing mode.
However, if the Soundcore Life Q20 headphones are already turned on, we need to turn them off first. Press the power button for 2 seconds to turn them off. After turning them off, press the power button for 5 seconds to enter pairing mode and turn them back on.
Get In The Bluetooth Range:
After putting your headphones in pairing mode, the most important preparation is to keep your Soundcore Life Q20 headphones within the Bluetooth range. If you are outside this range, your audio source won’t be able to detect your headphones.
The Bluetooth range is 10 feet, which is equivalent to 3 meters, and this remains the same for every headset.
To ensure that your audio source is within 10 feet, make sure to keep it nearby.
Read Here: SoundCore Brand Review: Is Soundcore a Good Brand
Charge Your Soundcore Life Q20:
The pairing of Soundcore Life Q20 headphones may sometimes take some time, such as when you are pairing them with a new device. In such cases, it’s essential to perform the pairing process slowly and follow each step carefully.
If the Soundcore Life Q20 headphones are low on battery during the pairing process, they might die in the middle of the process. Therefore, make sure that your headphones have at least a 20% charge.
To charge them, connect the Soundcore Life Q20 headphones with the USB cable provided and pair them with a power source.
So, these were the necessary preparations that you need to make for updating your Soundcore Life Q20 headphones in April. Now, let’s pair the Soundcore Life Q20 headphones with different devices.
How To Pair Soundcore Life Q20 With Android:
In the world of smartphones, Android is the most widely used operating system. Almost every music lover connects their headphones with their Android devices. In this section, we will discuss how to pair Soundcore Life Q20 headphones with Android.
- First, open your Android device and then find the settings app. The settings app is an app with a gear icon. Find it among the other apps on your android.
- Within the “Settings” app, find and select the option labeled “Bluetooth.” This is where you enable Bluetooth on your android.
- You’ll find a toggle switch on the bluetooth setting page on android. Slide it to enable Bluetooth.
- Once you enable the bluetooth, your Android device will start scanning for available devices.
- And you’ll see a list of available devices for bluetooth connection. Among the list of available devices, locate “Soundcore Life Q20” and tap on it to select it for pairing.
- Now, your Soundcore Life Q20 headphones are successfully paired with your Android device, and you can enjoy wireless audio playback.
How To Pair Soundcore Life Q20 With Iphone:
In comparison to Android, iPhones are the most widely used devices in the iOS ecosystem. iPhones, like Android devices, also pair with headphones through Bluetooth connectivity. The steps are almost similar.
Just as we connected Soundcore Life Q20 headphones to an iPhone, we will now do the same with another iPhone.
- First, unlock your iPhone or iPad
- And go to the “Settings” app. The Settings app icon typically looks like a gear. Just the same as android.
- Within the Settings app, look for and select “Bluetooth.” This is usually represented by a Bluetooth icon.
- There toggle the bluetooth button to enable the wireless mode of our iphone/ipad.
- Now, you’ll see a list of devices that are ready for connection.
- In the list of available devices under the Bluetooth settings, you should see “Soundcore Life Q20” listed. These are your headphones.
- Tap on “Soundcore Life Q20” in the list to establish a connection.
- Now, your Soundcore Life Q20 headphones are paired with your iPhone or iPad, and you can enjoy wireless audio playback seamlessly.
So, that’s how to pair soundcore life q20 headphones with iphone. Now, let’s move on with more devices/audio sources.
How To Pair Soundcore Life Q20 With Macbook:
IOS does not only contain iPhone or iPad. In laptops, the most demanded product is the MacBook. The steps in the MacBook are totally different from Windows. Let’s see how to pair Soundcore Life Q20 headphones with a MacBook.
- First, open “System Preferences” on your MacBook. You can find it by clicking the Apple logo in the top-left corner of the screen and selecting “System Preferences.”
- In the System Preferences window, locate and click on “Bluetooth.” Make sure the Bluetooth toggle switch is turned on to enable Bluetooth connectivity.
- While in the “Bluetooth” section of “System Preferences,” your MacBook will automatically start scanning for nearby Bluetooth devices.
- In the list of available devices, locate “Soundcore Life Q20” and click on it.
- Now, your Soundcore Life Q20 headphones are successfully paired with your MacBook, and you can enjoy audio wirelessly through them while using your MacBook.
How To Pair Soundcore Life Q20 With Linux:
Linux has an option that comes with the ownership of many users. Music lovers set up their customized Linux systems to suit their favorite music. Let’s see how to pair Soundcore Life Q20 headphones with Linux.
- Navigate to the Bluetooth settings on your Linux system. This can usually be found in the system settings or the system tray.
- The goal is to make sure Bluetooth is turned on and ready to discover nearby devices. The process varies because of different linux models.
- In the Bluetooth settings on your Linux device, find an option to search for new devices.
- This might be labelled as “Scan” or “Search for devices.” Activating this feature prompts your Linux system to look for nearby Bluetooth devices.
- After the scan is complete, your Linux system will present a list of available Bluetooth devices.
- Look for “Soundcore Life Q20” in this list and select it. This action initiates the pairing process between your Linux system and the headphones.
Note: Make sure to follow the on screen instruction on your specific linux, as the steps may vary due to model difference.
How To Pair Soundcore Life Q20 With Windows:
A new highly utilized PC is about to arrive, which is commonly referred to as “Windows.” Windows also facilitates Bluetooth connectivity, allowing the pairing of various devices. In order to pair the Soundcore Life Q20 headphones with Windows for optimal usage, we need to follow a set of steps.
- First, on your Windows device, click on the “Start” button located at the bottom left of your screen.
- Select the gear-shaped icon for “Settings” from the menu. This will open the Settings menu.
- In the Settings menu, look for and click on the “Devices” option.
- On the left sidebar of the Devices menu, click on “Bluetooth & other devices.”
- Ensure that Bluetooth is turned on. If it’s not, you’ll see a toggle switch; click it to enable Bluetooth.
- Under “Bluetooth & other devices,” click on the “Add Bluetooth or other device” option. This opens a pop-up window.
- In the pop-up window, choose “Bluetooth” as the type of device you want to add.
- When you see “Soundcore Life Q20” or a similar name in the list of available devices, click on it to initiate the pairing process.
So, that’s all about the process of pairing soundcore life q20 headphones with a windows pc.
How To Pair Soundcore Life Q20 With Smartwatch:
In today’s era, the smartwatch is considered one of the predominantly used devices. It is a portable device that allows us to enjoy our music effortlessly, without the need for any cables or bulky devices. Let’s delve into how to pair soundcore life q20 headphones with a smartwatch.
- Access the settings on your smartwatch. The same as in your iphone or android. Find the settings on your smartwatch among the other apps. .
- And then navigate to the Bluetooth section.
- Ensure that Bluetooth is turned on and that your smartwatch is set to be discoverable, allowing other devices to find it. For this toggle the switch button to enable bluetooth connectivity.
- Once you enable bluetooth, your smartwatch will provide the list of available devices for bluetooth connection.
- From the list of available devices on your smartwatch, find and select the Soundcore Life Q20 headphones.
How To Disconnect Soundcore Life Q20:
After using Soundcore earbuds, it is crucial to disconnect them to ensure optimal battery life and prevent any potential issues with our connections. Let’s see how to unpair the Soundcore Life Q20 headphones from any connected device.
To disconnect the Soundcore Life Q20 headphones from a device, follow these steps:
- First, Navigate to the Bluetooth settings on the device. As we have done it before.
- Then, Locate the paired devices list. And Find the Soundcore Life Q20 in the list.
- Then, Tap on the settings icon next to the device name. There, Select “Forget” or “Unpair” option.
So, that’s all the guides and steps on how to pair soundcore life q20 headphones with various devices and then unpair them.
Can You Pair Soundcore Life Q20 With Multiple Devices?
The simple answer is Yes. you can pair your soundcore life q20 headphones with more than one device. The Soundcore Life Q20 headphones support multi-device pairing.
This means you can connect them to and switch between multiple devices, such as smartphones, tablets, or computers.
But the thing that should be known is that you can’t use them with multiple devices at same time. If you want to listen to your soundcore life q20 headphones with two devices connected, then it is possible. But if you want to get the audio from both the devices, that’;s not possible.
Let’s discuss how to switch soundcore life q20 headphones between two connection devices.
- First, Turn on the Bluetooth on the first device (e.g., smartphone, tablet). As we have done it above.
- On the device, select the Soundcore Life Q20 from the list of available Bluetooth devices and complete the pairing process.
- Now, Turn off Bluetooth on the currently connected device or disconnect the headphones from the Bluetooth settings.
- On the second device, repeat the pairing process by selecting the Soundcore Life Q20 from the list of available Bluetooth devices
- Now, When you want to switch from one device to another, you have to disconnect the headphones from the currently connected device through its Bluetooth settings.
- On the device you want to switch to, make sure Bluetooth is turned on and select the Soundcore Life Q20 from the list of available devices.
Why Are My Soundcore Life Q20 Headphones Not Pairing: Reasons & Solutions
You have understood the method to pair Life Q20 earbuds; however, just as various Soundcore earbud models face various problems, users of the Soundcore Life Q20 also seem to encounter connecting issues.
The main reason for this is that we are unable to put the headphones in pairing mode. However, not all issues can be attributed to this single reason. Let’s explore which other reasons could contribute to these non-aspiring issues.
Out Of Bluetooth Range:
The Bluetooth range can be a potential reason for the Soundcore Life Q20 headphones not pairing issues. Bluetooth technology has a specific range in which we can pair two wireless connectable devices.
That’s typically around 30 feet (10 meters).
If the headphones are positioned too far away from the device they are supposed to connect to, the Bluetooth signal may weaken or become unstable. Make sure to be in that range to pair soundcore life q20 headphones with your device.
Magnetic Interference:
Now another cause of Soundcore Life Q20 headphones not entering pairing issues is the magnetic interference.
This interference can stem from electronic devices emitting wireless signals, the presence of multiple Bluetooth devices, obstacles like walls or metal objects, and external radio frequency signals.
To mitigate these problems, it is recommended to move away from interference sources, ensure a clear line of sight, and temporarily turn off other Bluetooth devices.
Low Battery:
If the battery of the Soundcore Life Q20 headphones is low, it can impact their ability to enter pairing mode.
When the battery is insufficiently charged, the headphones may not have enough power to initiate the pairing process or maintain a stable connection with other devices. In such cases, it’s advisable to charge the headphones fully before attempting to pair them with any device.
To charge them use a usb cable to connect the headphones with a power source and charge them at least 20%.
Not In Pairing Mode:
The pairing mode can be a crucial factor in addressing issues with Soundcore Life Q20 headphones not pairing with devices. Pairing mode is a state in which the headphones actively search for and establish a connection with a compatible device, such as a smartphone or computer.
If the headphones fail to enter pairing mode, it means they are not actively seeking new connections, leading to difficulties in establishing a link with other devices.
The first preparation always involves putting our Soundcore Life Q20 headphones into pairing mode. Press the power button on the headphones for 2 seconds to turn them on. Once they are turned on, they will automatically enter pairing mode.
Having Previous Pairing:
The difficulty of Soundcore Life Q20 headphones in entering pairing mode can be attributed to various factors related to previous connections.
This includes challenges arising from multiple connected devices. Resolving these issues involve disconnecting the headphones from all devices and then pairing them with a single one.
See our above guide to disconnect and pair with a new one.
Have A Software Glitch:
A software bug in the Soundcore Life Q20 headphones can impede the pairing process with other devices through various mechanisms.
Bugs in the user interface, affecting buttons or touch controls used to initiate pairing, may also hinder the headphones from entering pairing mode.
To address these issues often requires releasing firmware updates and rebooting the soundcore life q20 headphones.
To reset the Soundcore Life Q20 headphones, press and hold the “Play/Pause” button and the “Volume Up” button simultaneously for approximately 5 seconds.
Continue holding the buttons until the LED indicators flash red and blue. Release the “Play/Pause” and “Volume Up” buttons once the lights flash.
But if the issues still persist, then you have to hire the professional technician or acquire the anker repair service or simply contact the anker customer support.
Related Guide
Soundcore Liberty 3 Pro How to Pair
How to Pair Soundcore Life P3 Earbuds
How to Pair Soundcore q30
Soundcore q30 vs q20 Plus
Conclusion:
Pairing Soundcore Life Q20 headphones is very easy. In today’s guide, we discussed how to pair Soundcore Life Q20 headphones with different devices, including Android, iPhone, MacBook, smartwatches, Windows, and Linux. We have gone through the steps to successfully pair them.
During the pairing process, users often encounter issues where their headphones do not connect. We have discussed various reasons for this, and if you want to learn about pairing your Soundcore Life Q20 headphones, follow our guide thoroughly.
If you too face difficulties while pairing your headphones, this guide provides a comprehensive walkthrough.
Ahmed Hussain has dedicated decades of his life to serving the vibrant audio community. With a passion for sound that transcends mere expertise, Ahmed has become a respected figure in the industry. Through years of dedication, Ahmed has not only mastered the technical intricacies of sound but has also become a valued contributor, sharing his knowledge , expert researcher to uplift the entire audio community.